What is TapFeed (formerly Tapo-Viewer)?
TapFeed, renamed from Tapo-Viewer, is a portable Windows 10 and 11 app for TP-Link Tapo security cameras. It shows live video over RTSP, marks the days with recordings on the camera's microSD card, downloads clips to the PC as .ts files, plays two-way audio on supported models and drives pan and tilt on motorised ones such as the C200, C210, C225 and C500. It is built with Rust and Tauri 2, plays video through mpv and talks to the camera through pytapo, an unofficial Python library.
It needs a Tapo Camera Account for live video and, on some cameras, your Tapo app password to list and download recordings. Saved passwords go to Windows Credential Manager. Release v2.2.0 shipped on 21 November 2026.
Is TapFeed (formerly Tapo-Viewer) worth it?
Tapo cameras record to a microSD card, and getting a clip off that card without the phone app or a Tapo Care plan is surprisingly awkward. TapFeed does it from a calendar: pick a day, pick a clip, download. Version 2 is also much lighter than the first: a 62 MB download instead of 264 MB, and a start in about 3 seconds instead of 24 to 47, by the author's measurement on one PC.
It is not an AI tool and does nothing clever with the video; there is no motion search, object detection or continuous recording. Frigate is the project for that. TapFeed is a viewer and downloader, and judged as one it is tidy, with plain-language errors and one JSON file per interface language.
The catch is the credentials. Live video needs the Camera Account, and recordings on some models need your Tapo app password, which pytapo's documentation says is your TP-Link cloud password. That password opens the TP-Link account behind your cameras, so an app holding it deserves scrutiny; TapFeed keeps it in Windows Credential Manager only if you tick Remember. TP-Link's own guide calls RTSP and ONVIF not highly secure, for trusted local networks only, and recommends a VPN over port forwarding for remote viewing. The project has 6 stars, so few eyes have read the code, and pytapo carries no guarantee that the next firmware will not change the login, as one already did on the C200.
Our take: for pulling a specific clip off a camera you own, on your own Wi-Fi, it is a good free utility. Never forward port 554 to make it work from outside.
Where it earns its place
A small shop owner with two Tapo C200 cameras
Save the footage of a delivery dispute to the office PC
Run TapFeed.exe, enter the camera's IP and Camera Account, pick the day in the SD card calendar and download the clip as .ts video, which VLC opens. Free, no Tapo Care plan, and the footage never leaves the local network.
A parent using a pan-tilt Tapo C210 as a baby monitor
Watch and talk through the camera from a laptop instead of a phone
Use live view with sound, two-way audio and saved pan positions. Create a Camera Account with a strong password different from the Tapo app password, as TP-Link advises, and keep the camera off the public internet.
Before you commit
- Setup
- Download TapFeed.exe from Releases and run it; create a Camera Account in the Tapo app under Advanced settings, find the camera's IP under Device info and use Test to check it.
- Integrations
- Tapo cameras with a Camera Account and RTSP, such as the C100, C200, C210, C310 and C500; pytapo for camera control; mpv for playback. Battery cameras usually have no RTSP.
- Data and privacy
- Camera traffic stays on your network; passwords go only to the camera and, if you choose, Windows Credential Manager. The only internet request is an optional GitHub update check. TP-Link calls RTSP and ONVIF not highly secure.
- Limits
- Windows 10 and 11 only; downloads one clip at a time as .ts; no recording, motion detection or multi-camera wall.
What’s good
- Downloads SD card recordings without a subscription
- Camera traffic stays on your local network
- Passwords kept in Windows Credential Manager on request
- Portable executable, nothing to install
What’s not
- Some cameras need your TP-Link cloud password
- Windows only
- Single maintainer, 6 stars, little outside review
- Firmware updates can break the pytapo login
Best for
Tapo camera owners on Windows who want to view and save SD card footage locally without Tapo Care.
TapFeed (formerly Tapo-Viewer) alternatives
TapFeed (formerly Tapo-Viewer): common questions
- Is TapFeed (formerly Tapo-Viewer) worth it?
- TapFeed gets your Tapo footage onto a PC without TP-Link's cloud, but it is a one-person hobby project holding the keys to cameras inside your home. We rate it 3.4 out of 5.
- How much does TapFeed (formerly Tapo-Viewer) cost?
- Free and open source (MIT). No Tapo Care subscription needed.
- What are the downsides of TapFeed (formerly Tapo-Viewer)?
- Some cameras need your TP-Link cloud password; windows only; single maintainer, 6 stars, little outside review; firmware updates can break the pytapo login.
- Who is TapFeed (formerly Tapo-Viewer) best for?
- Tapo camera owners on Windows who want to view and save SD card footage locally without Tapo Care.
- Is TapFeed (formerly Tapo-Viewer) safe for company data?
- Camera traffic stays on your network; passwords go only to the camera and, if you choose, Windows Credential Manager. The only internet request is an optional GitHub update check. TP-Link calls RTSP and ONVIF not highly secure.
- What are the best TapFeed (formerly Tapo-Viewer) alternatives?
- The closest alternatives we have reviewed are Frigate.
Answers checked Nov 21, 2026.